GoJak G6313L Model G6313L Left
SKU: 93000658267

GoJak G6313L Model G6313L Left

$215.31 $239.23
Save 10%
No.2 Bestseller on kancelaria-przasnysz.pl >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

GoJak G6313L Model G6313L LeftEasily position locked, blocked or disabled vehicles with the GoJak Vehicle Positioning Jack Dolly. Use it in your shop, parking garage, or on a tow call. The American Made GoJak 6313 is an absolute work horse rated for vehicle curb weights up to 6,300 lbs. and tire widths up to 13" inches. The left handed version is helpful when the vehicle tire is turned at a sharp angle making the standard versions' pedal hard to access. Features include high

Easily position locked, blocked or disabled vehicles with the GoJak Vehicle Positioning Jack Dolly. Use it in your shop, parking garage, or on a tow call. The American-Made GoJak 6313 is an absolute work horse rated for vehicle curb weights up to 6,300 lbs. and tire widths up to 13" inches. The left handed version is helpful when the vehicle tire is turned at a sharp angle making the standard versions' pedal hard to access. Features include high strength steel rollers, upgraded 1-3/4" axles, and heavy-duty nylon, double-ball bearing raceway casters. This set up makes for smooth rolling under heavier loads. The GoJak 6313 also has a 5-degree offset pedal for additional foot-to-tire clearance when jacking. Equipped with the largest casters in the GoJak product line allows for increased ground clearance, especially useful when pulling cars up a flatbed. Designed, Manufactured, Tested and Proven in the USA since 1984. The Original Self-Loading Wheel Dolly, GoJak is the only way to roll!

Features

  • EXTREMELY DURABLE - All steel construction and high level of craftsmanship

  • EASY TO USE - Double ball bearing nylon casters make moving vehicle effortless

  • FAST & EFFICIENT - Mechanical design and quality components make jacking fast and easy with less strokes

  • VERSATILE - Rated for up to 6300 lbs 1575lbs per wheel and up to 13" wide tires

  • AMERICAN MADE - Designed, Tested, Manufactured, and Proven in the USA since 1984

Specifications


Manufacturer : Zendex Tool Corp.

Brand : GoJak

Item Weight : 47 pounds

Product Dimensions : 26.25 x 24.75 x 8.88 inches

Is Discontinued By Manufacturer : No

Manufacturer Part Number : G6313L

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 93000658267

    Discover Niche Categories That Outsell

    Top-Converting Item to Boost Your Average Order

    4.9 ★★★★★
    Based on 1444 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    J
    Verified Purchase
    Joe Baumgartner
    Grantham, US
    ★★★★★ 5
    Must need socket for doing oil changes
    Size: 32 mm, Color: Red
    This is exactly what i was looking for. Now it makes doing my oil changes much quicker to do.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on February 19, 2026
    R
    Verified Purchase
    Ryan
    Massapequa, US
    ★★★★★ 5
    Works great, do the double drain for best results
    My 06 Altima (185k miles) had been burning massive amounts of oil (like 4 quarts every 800 miles) due to a leaking PCV valve hose that took forever for me to narrow down (months). So after getting that under control I figured I needed to decontaminate the poor engine. When using this I idled my car to operating temp (about 8 minutes). Poured the bottle in, idled it for another 15 minutes. Drained the oil (black and thick). Put the plug back in, poured about 2.5qts of new oil in. Idled it for 10 minutes. Drained that (black but much thinner). Took the old filter off. Let both areas drain for 10 minutes. Put the plug back in, put the new filter on and filled with the 4.6qts of new oil my car calls for. Ran for a few minutes (like 2 with a few revs) and then let sit for 10 mins before checking the level. When I checked my dipstick it was so clean I thought I had a leak because I couldn't see it on any of the crosshatch. I ended up having to go by touch to get the reading. This stuff is amazing.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on November 15, 2025
    T
    Verified Purchase
    T. Lee
    West Palm Beach, US
    ★★★★★ 5
    Worked for me! Definitely recommend!
    Used a whole can in my 2009 Civic 1.8L with 150k miles. I can honestly say, this helped remove a lot of sludge out of the engine. The oil came out with a water-like texture and super dark! Before taking out the oil filter, I added new lower cost oil to the engine and let the engine run for about 5 minutes to get that extra flush! You can definitely see all the extra sludge in the new oil! Drained and refilled with new oil and filter. The engine definitely sounded quieter and smoother than before! If you value your car, I would definitely recommend doing this flush on your higher mileage cars every 50k miles or so! Definitely recommend this LiquiMoly product!
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 11, 2025
    J
    Verified Purchase
    JJ
    Louisville, US
    ★★★★★ 5
    3rd Update! See review... Good stuff and works as advertised...
    Update - 3rd oil change/flush. Engine oil draining from engine is waaaay cleaner than my first flush. Probably won't need to do a 4th time for several changes. I added Ceratec at this change and am amazed how much better the engine performs since my initial flush. Less clatter and very smooth idle. (Jeep 4.0 I6) Update- 2nd change and used the flush again. About 7000 miles from first use. The oil was cleaner and less "gunky" as first time but oil was definitely dirtier than normal. Right away noticed off idle throttle response improved. Then on a drive I take regularly with a mountain pass and long downhill I noticed that even tho the jeep downshifted out of OD it took much less throttle to hold 65 up a long grade. On the downhill normally I would see 50-60 mpg max on the digital readout. This time. It went to 99 which to me indicates more vaccum below the throttle plate. My guess is the rings freed up a bit more than the first flush and highway mileage is up to 23+ where I would get 21 before. Nice! Used in 2001 Jeep Grand Cherokee. 140k miles and a ticking lifter (common in the 4.0 - 6 cylinder...). Definitely cleaned sludge (oil filter very heavy!) and oil was dark when draining. Idles smoother, oil stays cleaner longer, slight oil pressure increase and runs cooler. The lifter still ticks but probably a cam lobe issue. Will use it after 7500 miles or 1 year. Will report back after next change.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on February 22, 2017
    J
    Verified Purchase
    J N Brown
    Omaha, US
    ★★★★★ 5
    Tips and tricks
    I watched several videos by professionals who used this. Follow instructions. Make sure the engine is warm before you put it in. Make sure you have everything you need. The biggest tip I got that was repeatedly emphasized by the pros was to buy a “cheap” oil in addition to the new oil. After you run the flush drain the oil and flush. Put the cheap oil in and “rinse” the inside of the engine with the cheap oil. Then drain again. Replace the oil and filter with your good stuff. I followed these instructions or suggestions and…. I sat in the truck while the flush was running. It’s a 13 year old truck with 150,000 miles. It was running strong but burning oil and kind of loud. Sounded like it was growling. There were some ticking type noises that made me nervous. As I sat in the truck and let the flush cycle through the engine at idle I could literally hear the flush working. Very slowly it was like someone gave the engine a Xanax and you could hear it getting quieter and calming down. I drained, rinsed with cheap oil only letting the cheap oil run through at idle for another 15 minutes then drained again. The oil flush was clearly important. It didn’t come out as black as the first drain but it looked like old nasty oil. The truck is no longer burning oil. My gas mileage has increased significantly and it is running so quiet and smooth it’s unbelievable. I used a little less of the liquid Molly flush than it called for regarding the flush to oil ratio. I didn’t want to do something too intense to the inside of the engine. But the results were remarkable. Just as advertised after following the instructions. I also added the liquid Molly oil additive to the final oil change to ‘lube’ the inside of the engine. I plan to do another flush in about 10,000 miles. All that to say, yes, you won’t be disappointed as long as you follow instructions and a few tips and tricks. My truck is almost running like a brand new truck and again it’s an old and tired truck. I will use this as part of a high mileage maintenance and perform the flush every 50,000 miles or so. I feel confident it will extend the life of my engine based on the results
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on February 9, 2024

    recommand products

    Allen Bradley via TCS X36444 NSFP (BK/GR) X 36444
    63.04
    Allen Bradley via TCS N38 NSFP (BK/YL) N 38
    11.00
    Allen Bradley via TCS via TCS 1492CJCW6 Ser. A NSFP 1492 CJC W6
    87.84
    Allen Bradley via TCS 800TKD1B19 Ser. A NSFP (BK/YL) 800T KD1B19
    49.00
    Allen Bradley via TCS 700DCP400Z24 Ser. D NSFP (BR/WH) 700DC P400Z24
    147.94